LightEdge 3000 series
LEX3020 CHASSIS FOR 20 SLOTS FOR LEX3000 SERIES
Set-type chassis for LEX3000 series media converters
The LEX3020 is a 19-inch rack-mount chassis with a height of 2U. It is a set-type chassis that can accommodate up to 20 LEX3000 series media converters. A special insertion mechanism is adopted for the chassis slots. When a line card is inserted or removed, loosening the screw tilts it to the right, pushing the card forward. It allows you to insert and remove a card smoothly without losing the screw.
In addition, a tray for extra fibre cable management is installed under the slot.
- Accommodates up to 20 lines cards in a 2U rack-mount.
- Supports installation of single/redundant SNMP management
- LED module status display and alarm output
- All modules support hot swapping
- Drawer-type extra cable management tray
LEX3910-15 AC power supply module and LEX3910-45 DC power supply module
LEX3930-00 MEDIA CONVERTER SNMP MANAGEMENT CARD
The LEX3930-00 is an SNMP management card for the LEX3020. It allows to monitor the status of power supply and fan units installed in the chassis, monitor the link status, and configure various settings via a network. In addition, it allows status monitoring of neighbouring line cards via OAM Link (IEEE802.3ah) and wide-area Ethernet status monitoring via Ethernet OAM (IEEE802.1ag / ITU-T Y.1731)
LEX3881-2F MEDIA CONVERTER 10GBASE-R TO 10GBASE-R
The LEX3881-2F is an Ethernet OAM-compatible media converter equipped with Link OAM/CFM feature. It is the world’s smallest Ethernet OAM-compatible media converter. The LEX3881-2F has operation, management, and maintenance functions for Ethernet networks, such as status monitoring of lines connecting neighbouring devices, monitoring of connection failures between multiple devices, throughput measurement, frame loss measurement, and frame delay measurement. It is highly cost effective and provides stable transmission quality via quick and easy identification and isolation of failure factors. In addition, it is equipped with a Dying Gasp feature that remotely indicates an instantaneous power-off such as a power outage, enabling a prompt response to the power failure.
LEX3821-2F - 1000BASE-FX/1000BASE-X TO 100BASE-FX/1000BASE-X MEDIA CONVERTER
Employs an SFP optical module. Supports 100BASE-FX and 1000BASE-SX/SX2/ LX/ZX. Single fibre type (BiDi/BX) or CWDM SFP can also be used. Switch operated supporting jumbo frames. Instant power-off notification feature (Dying Gasp) support. LED signal detection indicator and fan-less design. Made in Japan with Japanese quality.
LEX3020 CHASSIS FOR 20 SLOTS FOR LEX3000 SERIES
The LEX3020 is a 19-inch rack-mount chassis with a height of 2U. It is a set-type chassis that can accommodate up to 20 LEX3000 series media converters. A special insertion mechanism is adopted for the chassis slots. When a line card is inserted or removed, loosening the screw tilts it to the right, pushing the card forward. It allows you to insert and remove a card smoothly without losing the screw.
In addition, a tray for extra fibre cable management is installed under the slot.
- Accommodates up to 20 lines cards in a 2U rack-mount.
- Supports installation of single/redundant SNMP management
- LED module status display and alarm output
- All modules support hot swapping
- Drawer-type extra cable management tray
LIGHTEDGE 2000 SERIES
- Chassis for LE2001-15 1 slot (with built-in AC power source)
- Chassis for LE2001-45 1 slot (with built-in DC power source)
- Chassis for LE2002-15 2 slots (with built-in AC power source)
- Chassis for LE2002-45 2 slots (with built-in DC power source)
- Chassis for LE2020-15 20 slots (with built-in AC power source)
- Chassis for LE2020-45 20 slots (with built-in DC power source)
Stand-alone chassis with built-in power source, both AC and DC available. Optionally available management card enabling Telnet, Web, console, and SNMP.
Up to 20 media converter cards can be contained in the 2U-high case and up to 10 chassis can be cascaded. Ground contact allows alarm output.
LE2881-2F - LINE CARD FOR 10G MULTI RATE 3R
Supports interfaces: SFP+ to SFP+: 10GBASE-SR/LR/ER/ZR (supports SFP+ for 10G), 1-core type SFP+ (20 km, 40 km, 60 km), and SFP+ for CWDM.
Operating temperature of 0 to 50°C, Relay connection: Supports 3R, and has no restriction on packet length. All frames, such as Tag, BPDU, and long frame, are transparent. Various features as ALS function, loss propagation function, and loop-back function. SNMP management support
LE2821-2F - LINE CARD FOR 35M TO 2.7G MULTI RATE 3R
Supports interfaces: SFP to SFP. Operating temperature of 0 to 50°C. Ethernet support： 100M/1000M BASE-X. SONET/SDH support：OC-3/12/48, STM-1/4/16. Fibre Channel support：FC-1/FC-2. HD-SDI support. Supports 3R, and no restriction on packet length. Various features as ALS, loss propagation and loop-back.
LE2871 SERIES
- MC/switch for LE2871-00 RJ45×2 to SFP×2 Giga
- MC for LE2871-1F RJ45 to SFP Giga
The SFP slots enables conversion of various media. Combination in SFP (optical) ⇔ SFP (optical) any conversion is possible (MMF/SMF/1- core/2-core). Supports two ports of 10/100/1000BASE-TX and two ports of SFP. 10/100/1000BASE-T port equipped with auto-negotiation, MDI/MDI-X mode, and automatic setting function. Tag frame/QinQ double-tagged frame/EAP/BPDU transparent. Stand-alone device and/or a card-type, chassis-containing device. Supports LLF (Link Loss Forward) and LFP features. IEEE802.3ah-compliant. Redundant link supported.
LE2852 SERIES
LE2852-005 RJ45 to 550m MMF(SC)MC
- LE2852-10 RJ45 to 10km SMF(SC)MC
The SFP slots enables conversion of various media. Combination in SFP (optical) ⇔ Media converter 10/100/1000BASE-T port to 1000BASE-SX/LX. Auto-negotiation and MDI/MDI-X mode automatic setting feature and setting for speed/half duplex/ full duplex /auto- negotiation. LFP (Link Fault Pass-through) support. Status LEDs on the front panel. Stand-alone and/or card-type, chassis-containing device with hot-swap feature. Remote power outage notification (dying gasp). Reference of RMON counter. Tag frame/QinQ double-tagged frame/EAP/BPDU transparent.
LE2842 SERIES
LE2842-02（RJ45 to 2km MMF（SC）Media Converter
- LE2842-15（RJ45 to 15km SMF（SC）Media Converter
The SFP slots enables conversion of various media. Combination in SFP (optical) ⇔ Media converter for 10BASE-T/100BASE-TX and 100BASE-FX. Auto-negotiation support and MDI or MDI-X. LEDs displayed on the front panel, enabling easy segmentation. Supports in-band management (TTC-TS1000-compliant). Hot swap features available. Supports ALS (Auto Laser Shutdown) and remote power outage notification (Dying Gasp). Tag frame/QirQ double-tagged frame/EAP/BPDU transparent.
LE2841 SERIES
LE2841-20A RJ45 to 20KM SMF（SC）@1310nm Media Converter
LE2841-20B RJ45 to 20KM SMF (SC）@1550nm Media Converter
LE2841-40A RJ45 to 40KM SMF (SC）@1310nm Media Converter
LE2841-40B RJ45 to 40KM SM（SC）@1550nm Media Converter
Media converter for conversion 10BASE- T/100BASE-TX and 100BASE-FX. Manual setting for 100BASE-TX (full/fixed)/auto-negotiation. Manual setting for LFP (Link Fault Pass-through) OFF/ON. Supports MDI or MDI-X. LEDs displayed on the front panel, enabling easy segmentation. Supports in-band management (TTC-TS1000- compliant). Hot swap feature available. Supports ALS (Auto Laser Shutdown), remote power outage notification and Tag frame/QirQ double-tagged frame/EAP/ BPDU transparent.
LIGHTEDGE 1000 SERIES
LEX1012-15
Chassis for 12 slots with built-in AC power source). It is a set-type chassis mountable on a 19-inch rack compliant with ANSI/EIA RS-310-D and JIS C6010-2. Optional LEX1930-00 SNMP card monitoring by Web GUI, console, or network. Both AC and DC power sources can be used.
LEX1001PEH - MEDIA CONVERTER WITH POE FEATURE
This box can house one LEX1000 Series media converter and supply power to the PoE-receiving device (compatible with IEEE802.3af/at) via UTP. Power can be supplied to types of devices that require power and are PoE receiving feature compliant such as wireless access point and IP cameras.
LEX1881-1F - 10G BASE-T TO 10G BASE-R (SFP+) MEDIA CONVERTER
Mountable in set-type chassis LEX1012-15/45. SFP+ for 10G optical module, compatible with 10GBASE-SR/LR/ER/ZR. Single-core type (20 km/40 km/60 km) and SFP+ for CWDM also available. Repeater operation. Also transmits jumbo frames and VLAN-tagged frames. Fan-less design, made in Japan, Japanese quality.
LEX1851 SERIES/LEX1852 SERIES
LEX1852-005 – RJ45 to 550m MMF（SC）Media Converter
LEX1852-02 RJ45 to 2km MMF（SC）Media Converter
LEX1852-10 RJ45 to 15km SMF（SC）Media Converter
LEX1852-20 RJ45 to 20km SMF（SC）Media Converter
LEX1852-70 RJ45 to 70km SMF（SC）Media Converter
Media Converter for LEX1851-1F – RJ45 to SFP Giga
Ultrasmall LightEdge Xchange1000 Series is a business card size media converter that can be installed anywhere. It has high resistance to noise and supports long-distance communication.
Optimum solutions are provided for construction of a wide variety of optical networks not only for companies but also for buildings, factories, dams, expressways, and railroads.
Features can be selected with the DIP switches so that it can be used in the construction of a wide variety of networks. With improved product lifetime and high reliability, it can be designed for safe use. Equipped with several features.
LEX1841 SERIES/LEX1842 SERIES
LEX1841-1F – RJ45 to SFP Media Converter
LEX1841-20A – RJ45 to 30KM SMF（SC）@1310nm Media Converter
LEX1841-20B RJ45 to 30KM SMF（SC）@1550nm Media Converter
LEX1841-40A RJ45 to 40KM SMF（SC）@1310nm Media Converter
LEX1841-40B RJ45 to 40KM SMF（SC）@1550nm Media Converter
LEX1841-60A RJ45 to 60KM SMF（SC）@1310nm Media Converter
LEX1841-60B RJ45 to 60KM SMF（SC）@1550nm Media Converter
LEX1842-02 RJ45 to 2kmMMF（SC） Media Converter
- LEX1842-15 RJ45 to 15kmSMF（SC） Media Converter
Ultrasmall LightEdge® Xchange1000 Series is a business card size media converter that can be installed anywhere. It Has high resistance to noise and supports long-distance communication.
Optimum solutions are provided for construction of a wide variety of optical networks not only for companies but also for buildings, factories, dams, expressways, and railroads. Features can be selected with the DIP switches so that it can be used in the construction of a wide variety of networks. With improved product lifetime and high reliability, it can be designed for safe use. Supports various feature.
LEX1881-2F - 10G SFP+ TO 10G SFP+ MEDIA CONVERTER
Mountable in LEX1012 12-slot chassis. SFP+ for 10G optical module. Also, combination of 10GBASE-SR/LR/ER/ZR and single-core type (20 km/40 km/60 km) is possible. SFP+ for CWDM enables transmission of four lines of 10G with one fibre. Used for 10GBASE-SR and 10GBASE-LR conversion. Fan-less design, made in Japan, Japanese quality.
LEX1821-2F - SFP TO SFP MEDIA CONVERTER
LEX1821-2F is a 2 ports media converter connecting SFPs. It supports 3R on 125 M to 1.25 Gbps (Gigabit Ethernet). It can be inserted into the chassis to check the status, type, version, fiber link status, and alarm of the media converter.
LEX1542 SERIES
- LEX1542-02 RJ45 to 2km MMF（SC）Media Converter
- LEX1542-15 RJ45 to 15km SMF（SC）Media Converter
Guaranteed operation in a wide range of temperatures from -10°C to 60°C. Designed only for 100M, which interconverts 100BASE-FX signals by optical fiber and UTP 100BASE-TX signals. The product realizes miniaturization to the smallest domestic class and exhibits high resistance to noise and reliability.